Silkscreen Testing...Experiment #2

If you read last weeks entry you know I had allot of problems. With a fix of those problems and a few adjustments I had some success. Here are my results.

Following the instructions given for the emulsion I have, Ulano 925WR, I went ahead and coated the screen inside and outside the well. Let it dry and exposed for 7.5 minutes. Like magic my image appeared in the screen. Success with some notes.

• Exposure time should go a little longer, 10 mins.
• Used both a 300 mesh and 200 mesh screens. 300's are cherry.
• Also, always remember to mix your chemicals. Emulsion tends to seperate when not used. You can see that by how the screen looks streaked in color when dry.

Here is a pic of my first attempt at printing:

I was worried about the durability of the screen for multiple prints and runs. But so far it seems to be holding up. Printing on fabric is a lil different then paper. More ink is needed to seep into the fabric and equal amount of pressure will give you a solid print everytime. So here is my final result.

More to come!